IDENTIFICATION


GENERAL PARAMETERS

  • Payload: 240 t (8 standard 30 t containers)
  • Liftoff mass (M): 843.3 t (dry + payload + full reaction mass)
  • Dry mass (Me): 203.3 t with the heat-shield kit for the reference world; 190.3 t without it
  • Reaction mass: 400 t (water, 1 t/m^3)
  • Mass ratio (loaded): 1.902
  • Payload fraction: 28.5% of liftoff mass
  • Engine: gas-core nuclear (closed cycle), 50.6 GW jet power
  • Takeoff: VTOL on air
  • Crew: 4 in flight: 2 pilots + 2 cargo handlers (cabin and airlock 20 m^3)

PAYLOAD BAY

  • Capacity: 240 t
  • Bay volume: 364 m^3 (design density 0.66 t/m^3)
  • Standard containers: 8 standard 30 t containers
  • Access: rear cargo ramp and an opening upper hull with its own crane (30 t containers): works from unequipped pads and fields without ground handling

DIMENSIONS & GEOMETRY

Delta lifting body: planform 0.2625 L^2 (span 0.525 L), volume 0.1969 t L^3 (t = maximum thickness / length).

  • Length: 31.6 m
  • Span: 16.6 m
  • Maximum thickness (height): 4.1 m (relative thickness 0.13)
  • Volume: 804 m^3 = payload 364 + reaction mass 400 + systems 20 + crew 20
  • Surface area: 432 m^2 (A = 5 V^(2/3), as in the design sheet)

MASS BREAKDOWN

ComponentMass [t]Rule
Engine (incl. radiation shielding)101.22 t/GW
Radiators and kit mounts (fixed)4.30.01 t/m^2 of surface
Heat-shield kit (mountable)130.03 t/m^2 x kit scale 1
Structure64.30.08 t/m^3 of volume
Systems20.50.06 x (payload + engine)
Landing gear00 of landing mass (integrated in the printed structure)
Dry mass203.3

PROPULSION

  • Engine: gas-core nuclear (closed cycle); jet power 50.6 GW
  • Atmospheric phase: heats air, no reaction mass, up to 2.5 km/s on the reference world
  • Thrust / weight at liftoff: 1.53 on air, 1.11 on reaction mass -> VTOL on air
ModeExhaust velocity [km/s]Power shareThrust [MN]Acceleration at liftoff mass [m/s^2]
Air (static)8112.6515
low1119.210.91
high2214.65.45

ASCENT PROFILE

Reference world: Earth-like, 1 bar, mu 29, g 9.81 m/s^2, v_orb 7.8 km/s. The ascent is integrated in steps of horizontal speed; in every step the mode that burns the least reaction mass is used, so the mode switch and the gravity and drag losses follow from the thrust, the falling mass and the lift of the hull.

  • Free atmospheric phase: 0 -> 2.5 km/s
  • Mode switch: low -> high at 4.06 km/s
  • Rocket delta-v: 7.26 km/s = speed gain 5.3 + gravity / drag losses 1.46 + orbit insertion and steering 0.5
  • Reaction mass burnt: 287.4 t of 400 t
  • Lowest thrust margin: a / b = 1.15 at 4.06 km/s (b = weight not carried by the wing)
StatePayload [t]Liftoff mass [t]Reaction mass in orbit [t]Reserve in orbit [km/s]Required [km/s]Margin [km/s]
Loaded240843.3112.64.980.54.48
Empty0603.3229.116.60.516.1

Required reserve = ops 0.4 + deorbit 0.1 km/s (rendezvous and docking, deorbit; a powered landing is added only where the atmosphere is too thin to brake and land on air or gliding).


OPERATING ENVELOPE

Same hull and engine (50.6 GW); only the heat-shield kit is changed for the world. Loaded state.

Worldp0 [bar]g [m/s^2]v_orb [km/s]Kit scaleFree phase [km/s]Reserve [km/s]Required [km/s]Margin [km/s]Takeoff
Earth-like19.817.812.54.980.54.48VTOL on air
CO2, 1 bar19.817.812.033.970.53.47VTOL on air
Thin, 0.1 bar0.19.817.811.763.110.52.61VTOL on reaction mass
Mars0.0063.713.550.140.2310.171.698.47VTOL on reaction mass
Moon (airless)01.621.680012.242.359.9VTOL on reaction mass
Earth-size, airless09.817.800does not reach orbit (reaction mass)9.08n/aVTOL on reaction mass

THERMAL PROTECTION

  • Fixed (radiators, kit mounts): 4.3 t
  • Heat-shield kit for the reference world: 13 t (scale 1; 1 = full kit for entry from Earth orbit)
  • Kit rule: scale = larger of entry f_land x (v_orb / 7.8)^2 and ascent f x (v_air / 7.8)^2; 0 without an atmosphere

COST

  • Base price: 10.48 mln CC = engine 7.59 + structure 2.39 + systems 0.5
  • Heat-shield kit: TBD

DESIGN NOTES

  • Source: promy.xlsx, sheet MaxIkar; computed by helper-code/shuttle_designer.py (presets in shuttle_params.toml).
  • Model parameters that are proposals, not canon: lift share 0.3, L/D 4, free atmospheric phase 2.5 km/s at mu 29, reserve for rendezvous and docking 0.4 km/s, heat-shield kit split 0.01 + 0.03 t/m^2.
  • Largest member of the Ikar family, built by Ikarus Sky Freight on Artalan before the transshipment station existed; like the Ikar it returns on its own reaction mass, so its reserve is far above what an atmospheric landing needs.
  • Payload raised from the sheet’s 200 t to 240 t (2026-11-13): eight standard 30 t containers, same 400 t of reaction mass; the hull grows with the bay. The design sheet describes the 200 t version (dry mass typed as 185 t, 4.27 km/s of reserve with its fixed 10 km/s ascent budget) and is titled ‘Ikar’ in its header cell (copied from the Ikar sheet).
  • The opening hull and the crane are not separate mass lines: they are taken as covered by the higher structure coefficient of the Ikar sheets (0.08 t/m^3 against 0.06 for the C-series).
  • Artalan (0.96 R_Earth, ~1.00 g, terraformed breathable atmosphere) is an Earth-like world: the reference ascent applies to it directly.

SEMANTIC TAGS

shuttle cargo maxikar ikarus_sky_freight artalan


Template: shuttle_equipment_card_v1 - part of canon/equipment/cards/